 |
|
|
|
True-Cal is an innovative solution to the problems presented by the accurate calibration of 3 point bore gauge micrometers. Any micrometer (from 16-200mm) can be calibrated on a single unit, and the True-Cal method dispenses with the need for large numbers of settings rings and provides more comprehensive results. |
|
 |
| The True-Cal system relies on the use of slip gauges with an optional electronic transducer output. Operation is quick and simple, and requires no specialist skills. |
|
| Convensional ring gauge methods do not give comprehensive indications of linearity. True-Cal allows the gauge to be checked at any point on the range o the gauge being inspected. |
|
| True-Cal measurement are traceable through the slip gauges used and the certification of the angular setting block. |
|
| True-Cal simplifies gauge management by dispensing with the need for costly ring gauges and their periodic calibration. This reduces costs in both the long and short term. |
|
True-Cal unit is supplied complete with :
- 60 degree setting master
- Slider Anvil
- Gauge Block
- Base Unit with side blocks ( A & B)
- Complete Unit is supplied in a wodden box.
Callibration certificate for 60 degree setting master and base unit can be supplied as an option. |
 |
| Pl. note: The illustrations and specifications may be changed without prior notice. |
| |
